NATIONAL LIGHTING CORP. CANISTER LIGHTS

CANISTER LIGHTS

CN SERIES WITH 40W S11 BULB

Stamped metal fixture with no welded seams.
3-1/4" diameter and 2-7/8" high. 40w S-11 light bulb.
Adjustable mounting ring allows installation at various
depths.18 AWG SPT-2 wire. Packing: 50pcs/ctn.

•CN2
•3ft. male connector and 3ft. female polarized connector.

•CN3
•10ft. male power cord, in-line roll switch 5 ft. from plug. 3ft. female polarized connector.

•CN4
•10ft. male power cord, in-line roll switch 5ft. from plug.

•CN10
•Single can light with push switch located 3ft. from can. 10ft. power cord.

•CN20
•Double can light with push switch located 3ft. from can,with 3ftcord between cans. 10ft. power cord.

•CN30
•Triple can light with push switch located 3ft. from first can, with 3ft.cord between cans.10ft. power cord.

CN SERIES WITH 40W R 14 BULB

•CN9126
•10ft. male power cord, in-line roll switch 5ft. from plug.

•CN9226
•Double can light, 3ft. cord between cans, 10ft. power cord with in-line roll switch 5ft. from plug.

•CN9326
•Triple can light, 3ft. cord between cans. 10ft. power cord with in line roll switch 5ft. from plug.

•CN9128
•Single can light with push switch located 3ft. from can. 10ft. power cord.

•CN9228
•Double can light with push switch located 3ft. from can, with 3ft. cord between cans, 10ft. power cord.

•CN9328
•Triple can light with push switch located 3 ft. from first can, with 3ft. cord.

Options:
Bulbs: 35W PAR16, 50W PAR-16, 50PAR-20 Halogen Bulb. Note:Can height is3-15/16" with Par-20 bulbs.
Power COntrol: Roll Switch, Push Switch, Turn Dimmer, and Touch Dimmer.

CN SERIES WITH 40W R 14 BULB

FLANGES
•Decorative flanges are are available in four finishes for the CN series.
They add value to any piece of furniture. 4-3/16" outside dia. Packing: 50 pcs/ctn.

•FL1
•Polished brass

•FL2
•Black

•FL3
•Chrome
•FL5
•Satin Chrome

•FL4
•Almond
•FL6
•White

CF SERIES WITH HALOGEN PAR-16 or PAR-20 BULB.

Can light with beveled flange. 3-5/16" dia. and 3"high. Fastened by using adjustable mounting ring or through screw hole in flange, or by spring clip.

•CF1139
•Flange at open end with/adjustable mounting ring, 50W PAR-20 bulb, touch dimmer.

•CF1239
•Two light set, flange at open end with/adjustable mounting ring, 50W PAR-20 bulb, touch dimmer.

•CF3140
•Flange at open end with/screw holes, 50W PAR-16 bulbs, and turn dimmer.

•CF3240
•Three light set, flange at open end with/screw holes, 50W PAR-16 bulb, turn dimmer.

•CF3340
•Three light set, flange at open end with/screw holes, 50W PAR-16 bulb, turn dimmer.

Options:
BULB: S-11, R14, PAR-16, PAR-20
SWITCH:In -line roll switch, touch dimmer.

•CF1
•Flange at open end with holes.

•CF2
•Flange at open end with holes.

•CF3
•Flange at middle with holes.

•CF4
•Can with/ mounting tabs.

•CF5
•Flange at middle with holes.

•CF6
•Flange at open end with holes with spring clips.

•CF7
•Flange at close end with holes.

•CF8
•Flange at close end with holes, tapered open end.

•CF0
•No flange with bracket.

SWIVEL CAN LIGHT

•Swivel Can Light with flange 3-5/16" dia., 3"high. Fastened by using adjustable mounting ring or through screw holes in flange.

•SC1
•3 ft. male connector.

•SC2
•3 ft. male connector, 3ft female connector.

•SC3
•10 ft. male power cord with in-line roll switch 5 ft. from plug, 3' female connector.

•SC4
•10 ft. male power cord with in-line roll switch 5 ft. from plug.

MINI-SWIVEL LIGHT

The mini-swivel light adds style and value.
Mounts with 3 screws through mounting plate.
Polished brass trim ring attached to mounting plate for a finish look.
Recess height: 2-3/4", overall width including flange:4-3/8".
Bore hole at 2-7/8", dia. to install.
40W S-11light bulb included. SPT-2 wire.

•FE1
•3 ft. male connector.

•FE2
•3 ft. male connector, 3 ft. female connector.

•FE3
•10 ft. male power cord with in-line roll switch 5 ft. from plug, 3 ft. female connector.

•FE4
•10 ft. male power cord within-line roll switch 5 ft. from plug.

•FE5
•10ft. male power cord.